#include <BMeasureUnits.h>

Inheritance diagram for BMeasureApi::BMeasureUnits:

Public Member Functions
	BMeasureUnits (Bool threaded=0)

virtual	~BMeasureUnits ()

void	clear ()

BError	unitsFind ()

BError	unitAdd (BString serialNumber, BString device)

BError	unitDelete (BString device)

BUInt32	unitsNum ()

BUInt32	unitsConnectedNum ()

BMeasureUnit1 &	unit (BUInt u)

BMeasureUnit1 &	unitMaster ()

BError	unitsConnect ()

Bool	unitsConnected ()

BError	unitsDisconnect ()

virtual void	disconnected ()

BError	unitSetOrder (BUInt u, BUInt order, Bool move)

BError	unitSetEnabled (BUInt u, Bool enable)

BError	dataSetNumStreams (BUInt num)
	Set the number of data output channels. More...

void	dataStreamEnable (Bool on)
	Enable the streaming of data. More...

void	dataClear ()

BUInt	dataAvailable (BUInt stream)

BError	dataWait (BUInt stream, BTimeout timeoutUs=BTimeoutForever)

virtual void	dataEvent (BUInt stream)

DataBlock *	dataRead (BUInt stream)

void	dataDone (BUInt stream)

virtual void	dataProcEvent (BUInt stream)

DataBlockProc *	dataProcRead (BUInt stream)

void	dataProcDone (BUInt stream)

void	run ()
	Threaded run mode. More...

void	sendDataQueue (const DataBlock &dataBlock)

void	sendDataProcQueue (const DataBlock &dataBlock)

void	sendDataProcess ()

void	sendDataProcessTrigger ()

void	outputBlock (BMeasureUnitsDataBlock *block)

virtual BError	getNodeInfo (NodeInfo &nodeInfo)

virtual BError	login (const BString &userid, const BString &password)

virtual BError	logout ()

virtual BError	changePassword (const BString &userid, const BString &oldPassword, const BString &newPassword)

virtual BUInt	numChannels ()
	The number of channels of data. More...

virtual BError	setMode (const Mode &mode)
	Set the current operational mode. More...

virtual BError	getStatus (NodeStatus &nodeStatus)

virtual void	sendTime (const BTimeUs &time)
	Sends the current time. More...

virtual BError	getInformation (Information &info)

virtual BError	getInfoBlock (InfoBlock &infoBlock)

virtual BError	getChannelConfig (const BUInt8 &channelNumber, ChannelConfig &channelConfig)

virtual BError	setChannelConfig (const BUInt8 &channelNumber, const ChannelConfig &channelConfig)

virtual BError	getConfig (Configuration &config)
	Should we have this, not generic for different instruments ? More...

virtual BError	setConfig (const Configuration &config)
	Should we have this, not generic for different instruments ? More...

virtual BError	getMeasurementConfig (const Bool &saved, MeasurementConfig &measurement)
	Get measurement config. More...

virtual BError	setMeasurementConfig (const Bool &save, const MeasurementConfig &measurement)
	Set measurement config. More...

virtual BError	sendDataEnable (const DataSend &dataSend)
	Enables the sending of data. More...

virtual BError	getAwgConfig (const Bool &saved, AwgConfig &awgConfig)
	Get AWG Configuration. More...

virtual BError	setAwgConfig (const Bool &save, const AwgConfig &awgConfig)
	Configure AWG. More...

virtual BError	alarmsClear (const BUInt32 &bits)
	Clear all alarms. More...

virtual void	sendDataServe1 (const DataBlock &dataBlock)

virtual void	sendMessage (BUInt32 &source, BString &message)

virtual void	sendMessageServe (const BUInt32 &source, const BString &message)

void	debugPrint ()

Public Member Functions inherited from BTask
	BTask (const char *name="", BUInt stackSize=0, BUInt priority=1)

	~BTask ()

void	init (const char *name, BUInt stackSize=0, BUInt priority=1)

BError	start ()

void	stop ()

void	waitForCompletion ()

int	setPriority (BUInt priority)

Private Member Functions
BMeasureUnitsDataBlock *	getFreeBlock (BUInt numSamples)

Private Attributes
BSemaphoreBool	oprocEnable
	Enable processing. More...

BSemaphoreBool	oprocRunning
	Processing is running. More...

BMutex	olockUnits

BList< BMeasureUnit1 * >	ounits

BInt	ounitMaster

BUInt	onumConnected

BUInt	onumChannels

BUInt	odataStreamNum

BUInt32	ofill

BUInt	onumBlocks

BMutex	olockInput

BList< BMeasureUnitsDataBlock * >	odataBlocksFree

BList< BMeasureUnitsDataBlock * >	odataBlocksIn

BList< BMeasureUnitsDataBlock * >	odataBlocksProcess

BCondInt	odataBlocksProcessNum

BMutex	olockOutput

BList< BMeasureUnitsDataBlock * >	odataBlocksOut [2]

BCondInt	odataBlocksOutCount [2]

BMutex	olockProcInput

BList< DataBlock >	odataProcBlocks

MeasurementConfig	olocalTrigger

Bool	otriggered

BUInt	ostartSample

Additional Inherited Members
Static Protected Member Functions inherited from BTask
static void *	taskFunc (void *)

Protected Attributes inherited from BTask
const char *	oname

BUInt	ostackSize

BUInt	opolicy

BUInt	opriority

pthread_t	othread

Bool	orunning

Constructor & Destructor Documentation

◆ BMeasureUnits()

BMeasureApi::BMeasureUnits::BMeasureUnits ( Bool threaded = 0 )

◆ ~BMeasureUnits()

BMeasureApi::BMeasureUnits::~BMeasureUnits ( )

virtual

Member Function Documentation

◆ alarmsClear()

BError BMeasureApi::BMeasureUnits::alarmsClear ( const BUInt32 & bits )

virtual

Clear all alarms.

◆ changePassword()

BError BMeasureApi::BMeasureUnits::changePassword	(	const BString &	userid,
		const BString &	oldPassword,
		const BString &	newPassword
	)

virtual

◆ clear()

void BMeasureApi::BMeasureUnits::clear ( )

◆ dataAvailable()

BUInt BMeasureApi::BMeasureUnits::dataAvailable ( BUInt stream )

◆ dataClear()

void BMeasureApi::BMeasureUnits::dataClear ( )

◆ dataDone()

void BMeasureApi::BMeasureUnits::dataDone ( BUInt stream )

◆ dataEvent()

void BMeasureApi::BMeasureUnits::dataEvent ( BUInt stream )

virtual

◆ dataProcDone()

void BMeasureApi::BMeasureUnits::dataProcDone ( BUInt stream )

◆ dataProcEvent()

void BMeasureApi::BMeasureUnits::dataProcEvent ( BUInt stream )

virtual

◆ dataProcRead()

DataBlockProc * BMeasureApi::BMeasureUnits::dataProcRead ( BUInt stream )

◆ dataRead()

DataBlock * BMeasureApi::BMeasureUnits::dataRead ( BUInt stream )

◆ dataSetNumStreams()

BError BMeasureApi::BMeasureUnits::dataSetNumStreams ( BUInt num )

Set the number of data output channels.

◆ dataStreamEnable()

void BMeasureApi::BMeasureUnits::dataStreamEnable ( Bool on )

Enable the streaming of data.

◆ dataWait()

BError BMeasureApi::BMeasureUnits::dataWait	(	BUInt	stream,
		BTimeout	timeoutUs = `BTimeoutForever`
	)

◆ debugPrint()

void BMeasureApi::BMeasureUnits::debugPrint ( )

◆ disconnected()

void BMeasureApi::BMeasureUnits::disconnected ( )

virtual

◆ getAwgConfig()

BError BMeasureApi::BMeasureUnits::getAwgConfig	(	const Bool &	saved,
		AwgConfig &	awgConfig
	)

virtual

Get AWG Configuration.

◆ getChannelConfig()

BError BMeasureApi::BMeasureUnits::getChannelConfig	(	const BUInt8 &	channelNumber,
		ChannelConfig &	channelConfig
	)

virtual

◆ getConfig()

BError BMeasureApi::BMeasureUnits::getConfig ( Configuration & config )

virtual

Should we have this, not generic for different instruments ?

◆ getFreeBlock()

BMeasureUnitsDataBlock * BMeasureApi::BMeasureUnits::getFreeBlock ( BUInt numSamples )

private

◆ getInfoBlock()

BError BMeasureApi::BMeasureUnits::getInfoBlock ( InfoBlock & infoBlock )

virtual

◆ getInformation()

BError BMeasureApi::BMeasureUnits::getInformation ( Information & info )

virtual

◆ getMeasurementConfig()

BError BMeasureApi::BMeasureUnits::getMeasurementConfig	(	const Bool &	saved,
		MeasurementConfig &	measurement
	)

virtual

Get measurement config.

◆ getNodeInfo()

BError BMeasureApi::BMeasureUnits::getNodeInfo ( NodeInfo & nodeInfo )

virtual

◆ getStatus()

BError BMeasureApi::BMeasureUnits::getStatus ( NodeStatus & nodeStatus )

virtual

◆ login()

BError BMeasureApi::BMeasureUnits::login	(	const BString &	userid,
		const BString &	password
	)

virtual

◆ logout()

BError BMeasureApi::BMeasureUnits::logout ( )

virtual

◆ numChannels()

BUInt BMeasureApi::BMeasureUnits::numChannels ( )

virtual

The number of channels of data.

◆ outputBlock()

void BMeasureApi::BMeasureUnits::outputBlock ( BMeasureUnitsDataBlock * block )

◆ run()

void BMeasureApi::BMeasureUnits::run ( )

virtual

Threaded run mode.

Reimplemented from BTask.

◆ sendDataEnable()

BError BMeasureApi::BMeasureUnits::sendDataEnable ( const DataSend & dataSend )

virtual

Enables the sending of data.

◆ sendDataProcess()

void BMeasureApi::BMeasureUnits::sendDataProcess ( )

◆ sendDataProcessTrigger()

void BMeasureApi::BMeasureUnits::sendDataProcessTrigger ( )

◆ sendDataProcQueue()

void BMeasureApi::BMeasureUnits::sendDataProcQueue ( const DataBlock & dataBlock )

◆ sendDataQueue()

void BMeasureApi::BMeasureUnits::sendDataQueue ( const DataBlock & dataBlock )

◆ sendDataServe1()

void BMeasureApi::BMeasureUnits::sendDataServe1 ( const DataBlock & dataBlock )

virtual

◆ sendMessage()

void BMeasureApi::BMeasureUnits::sendMessage	(	BUInt32 &	source,
		BString &	message
	)

virtual

◆ sendMessageServe()

void BMeasureApi::BMeasureUnits::sendMessageServe	(	const BUInt32 &	source,
		const BString &	message
	)

virtual

◆ sendTime()

void BMeasureApi::BMeasureUnits::sendTime ( const BTimeUs & time )

virtual

Sends the current time.

◆ setAwgConfig()

BError BMeasureApi::BMeasureUnits::setAwgConfig	(	const Bool &	save,
		const AwgConfig &	awgConfig
	)

virtual

Configure AWG.

◆ setChannelConfig()

BError BMeasureApi::BMeasureUnits::setChannelConfig	(	const BUInt8 &	channelNumber,
		const ChannelConfig &	channelConfig
	)

virtual

◆ setConfig()

BError BMeasureApi::BMeasureUnits::setConfig ( const Configuration & config )

virtual

Should we have this, not generic for different instruments ?

◆ setMeasurementConfig()

BError BMeasureApi::BMeasureUnits::setMeasurementConfig	(	const Bool &	save,
		const MeasurementConfig &	measurement
	)

virtual

Set measurement config.

◆ setMode()

BError BMeasureApi::BMeasureUnits::setMode ( const Mode & mode )

virtual

Set the current operational mode.

◆ unit()

BMeasureUnit1 & BMeasureApi::BMeasureUnits::unit ( BUInt u )

◆ unitAdd()

BError BMeasureApi::BMeasureUnits::unitAdd	(	BString	serialNumber,
		BString	device
	)

◆ unitDelete()

BError BMeasureApi::BMeasureUnits::unitDelete ( BString device )

◆ unitMaster()

BMeasureUnit1 & BMeasureApi::BMeasureUnits::unitMaster ( )

◆ unitsConnect()

BError BMeasureApi::BMeasureUnits::unitsConnect ( )

◆ unitsConnected()

Bool BMeasureApi::BMeasureUnits::unitsConnected ( )

◆ unitsConnectedNum()

BUInt BMeasureApi::BMeasureUnits::unitsConnectedNum ( )

◆ unitsDisconnect()

BError BMeasureApi::BMeasureUnits::unitsDisconnect ( )

◆ unitSetEnabled()

BError BMeasureApi::BMeasureUnits::unitSetEnabled	(	BUInt	u,
		Bool	enable
	)

◆ unitSetOrder()

BError BMeasureApi::BMeasureUnits::unitSetOrder	(	BUInt	u,
		BUInt	order,
		Bool	move
	)

◆ unitsFind()

BError BMeasureApi::BMeasureUnits::unitsFind ( )

◆ unitsNum()

BUInt BMeasureApi::BMeasureUnits::unitsNum ( )

Member Data Documentation

◆ odataBlocksFree

BList<BMeasureUnitsDataBlock*> BMeasureApi::BMeasureUnits::odataBlocksFree

private

◆ odataBlocksIn

BList<BMeasureUnitsDataBlock*> BMeasureApi::BMeasureUnits::odataBlocksIn

private

◆ odataBlocksOut

BList<BMeasureUnitsDataBlock*> BMeasureApi::BMeasureUnits::odataBlocksOut[2]

private

◆ odataBlocksOutCount

BCondInt BMeasureApi::BMeasureUnits::odataBlocksOutCount[2]

private

◆ odataBlocksProcess

BList<BMeasureUnitsDataBlock*> BMeasureApi::BMeasureUnits::odataBlocksProcess

private

◆ odataBlocksProcessNum

BCondInt BMeasureApi::BMeasureUnits::odataBlocksProcessNum

private

◆ odataProcBlocks

BList<DataBlock> BMeasureApi::BMeasureUnits::odataProcBlocks

private

◆ odataStreamNum

BUInt BMeasureApi::BMeasureUnits::odataStreamNum

private

◆ ofill

BUInt32 BMeasureApi::BMeasureUnits::ofill

private

◆ olocalTrigger

MeasurementConfig BMeasureApi::BMeasureUnits::olocalTrigger

private

◆ olockInput

BMutex BMeasureApi::BMeasureUnits::olockInput

private

◆ olockOutput

BMutex BMeasureApi::BMeasureUnits::olockOutput

private

◆ olockProcInput

BMutex BMeasureApi::BMeasureUnits::olockProcInput

private

◆ olockUnits

BMutex BMeasureApi::BMeasureUnits::olockUnits

private

◆ onumBlocks

BUInt BMeasureApi::BMeasureUnits::onumBlocks

private

◆ onumChannels

BUInt BMeasureApi::BMeasureUnits::onumChannels

private

◆ onumConnected

BUInt BMeasureApi::BMeasureUnits::onumConnected

private

◆ oprocEnable

BSemaphoreBool BMeasureApi::BMeasureUnits::oprocEnable

private

Enable processing.

◆ oprocRunning

BSemaphoreBool BMeasureApi::BMeasureUnits::oprocRunning

private

Processing is running.

◆ ostartSample

BUInt BMeasureApi::BMeasureUnits::ostartSample

private

◆ otriggered

Bool BMeasureApi::BMeasureUnits::otriggered

private

◆ ounitMaster

BInt BMeasureApi::BMeasureUnits::ounitMaster

private

◆ ounits

BList<BMeasureUnit1*> BMeasureApi::BMeasureUnits::ounits

private

The documentation for this class was generated from the following files:

Public Member Functions

Private Member Functions

Private Attributes

Additional Inherited Members

Constructor & Destructor Documentation

◆ BMeasureUnits()

◆ ~BMeasureUnits()

Member Function Documentation

◆ alarmsClear()

◆ changePassword()

◆ clear()

◆ dataAvailable()

◆ dataClear()

◆ dataDone()

◆ dataEvent()

◆ dataProcDone()

◆ dataProcEvent()

◆ dataProcRead()

◆ dataRead()

◆ dataSetNumStreams()

◆ dataStreamEnable()

◆ dataWait()

◆ debugPrint()

◆ disconnected()

◆ getAwgConfig()

◆ getChannelConfig()

◆ getConfig()

◆ getFreeBlock()

◆ getInfoBlock()

◆ getInformation()

◆ getMeasurementConfig()

◆ getNodeInfo()

◆ getStatus()

◆ login()

◆ logout()

◆ numChannels()

◆ outputBlock()

◆ run()

◆ sendDataEnable()

◆ sendDataProcess()

◆ sendDataProcessTrigger()

◆ sendDataProcQueue()

◆ sendDataQueue()

◆ sendDataServe1()

◆ sendMessage()

◆ sendMessageServe()

◆ sendTime()

◆ setAwgConfig()

◆ setChannelConfig()

◆ setConfig()

◆ setMeasurementConfig()

◆ setMode()

◆ unit()

◆ unitAdd()

◆ unitDelete()

◆ unitMaster()

◆ unitsConnect()

◆ unitsConnected()

◆ unitsConnectedNum()

◆ unitsDisconnect()

◆ unitSetEnabled()

◆ unitSetOrder()

◆ unitsFind()

◆ unitsNum()

Member Data Documentation

◆ odataBlocksFree

◆ odataBlocksIn

◆ odataBlocksOut

◆ odataBlocksOutCount

◆ odataBlocksProcess

◆ odataBlocksProcessNum

◆ odataProcBlocks

◆ odataStreamNum

◆ ofill

◆ olocalTrigger

◆ olockInput

◆ olockOutput

◆ olockProcInput

◆ olockUnits

◆ onumBlocks